Chinese specification: GB/T 15620 SNi6686International specification:AWS A5.14,ERNiCrMo-14,UNS N06686,ASME II,SFA-5.14,ERNiCrMo-14,ASME IX,F-No.43ERNIC/Mo-14 is used for the gas metal and gas tungsten arc welding of UNS N06686 and other alloys of similar composition, The filler metal is used as a co
Products
ERNiCrMo-14
DETAIL
Chinese specification: GB/T 15620 SNi6686
International specification:
AWS A5.14,ERNiCrMo-14,UNS N06686,ASME II,SFA-5.14,ERNiCrMo-14,ASME IX,F-No.43
ERNIC/Mo-14 is used for the gas metal and gas tungsten arc welding of UNS N06686 and other alloys of similar composition, The filler metal is used as a corrosion-resistant overlay on carbon and low alloy steels and as an over matching Filler metal for alloys of similar compositions, such as C-276. The matte finish on the spooled wire promotes smooth feeding through welding equipment and reduced tip wear in contact tips.
MAIN CHEMICAL COMPOSITION (%)
Ni | C | Si | S | P | Mn | Fe | Cr | Mo | Cu | Co | W | Al |
≥49 | ≤0.1 | ≤0.08 | ≤0.015 | ≤0.02 | ≤1.0 | ≤5.0 | 19~23 | 15~17 | ≤0.50 | ≤0.25 | 3.0~4.4 | ≤0.5 |
MINIMUM MECHANICAL PROPERTIES
Tensile Strength | Elongation(%) | |
Psi | Mpa | 35 |
110000 | 1138 | |
AVAILABLE PRODUCT FORMS
Available on spool (Precision Layer Wound) and in cut straight lengths.
Straight Rods(TIG)-mm | 1.2~3.2 |
Spooled Wire(MIG)-mm | 0.8~1.2 |